Coming soon to a photo blog near you
I will soon have pics of bodywork progress and some new parts and pieces.
posted by chilort @ 8:59 PM
0 comments
The Hobby
Wednesday, January 26, 2005
Sunday, January 23, 2005
RamCharger
This base plate and orange lid are now sold.
The fiberglass box has now been cleaned up. The sticker has been pulled off (finally). Now I need to paint -- or something -- and get new seals installed.
posted by chilort @ 5:23 PM
0 comments
TicToc
Tic-Toc-Tac ralley dash with woodgrain. This is going to be a MF to resto. Anyone want to send me $$?
posted by chilort @ 5:18 PM
0 comments
Front Suspension
On the living room floor before going on a furnature trolly and being moved out to the garage for install.
posted by chilort @ 5:15 PM
0 comments
UR on LCA
Up right on lower control arm. Note all the semi-gloss blcack powder coat. I used spray bomb clear on the upright and lower ball joint. I don't know what happened but all of the spray bomb stuff is already rusted.
posted by chilort @ 4:52 PM
0 comments
Press
Pressing new tapered bearings onto new Moser axels with 5 on 4.5" bolt centers
posted by chilort @ 4:47 PM
0 comments
Transmission
A clean 727. Hot tanking didn't get it clean enough. Sure, the grease was gone but it still had dirt in the deep pits. So the casing went into the bath tub. Wire brushes, some TSP, and some elbow grease later it now looks like new.
posted by chilort @ 4:39 PM
0 comments
UnderSide Rear
The pink 8 3/4. Why pink? I have no idea. Note the air shocks (sooo 70s) and 11" drum brakes. Wait for pics I upload later with this rear powder coated in semi-gloss black with 11.75" disk brakes.
posted by chilort @ 4:29 PM
0 comments
K Frame and Engine Bay
Ahhh, the k-frame. Wait for pictures I will upload soon with this powder coated in semi-gloss black.
posted by chilort @ 4:26 PM
0 comments
Ram Charger Hood
Hood as purchased. I'm working on this part now. It has rust on the bottom and a big dent on the front hidden well by paint and bondo.
posted by chilort @ 3:53 PM
0 comments
The Post
Pic 5 from when I bought the car. Note: this is a post car. There were only 4000 or so 70 Superbee post cars and 16000 standard hardtops.
posted by chilort @ 3:46 PM
0 comments
Bill Casner's car
This is Bill's bracket car. He helped me rebuild my transmission, press in some bushings for the front end, and re-build the rear end.
posted by chilort @ 3:37 PM
0 comments
1970 Superbee
This is my photobolg for my 1970 Superbee restoration project. Follow me through the years as I work on my project.
posted by chilort @ 3:24 PM
0 comments
Previous Posts
- Looking good
- Swepty got a new windshield!
- Door panels for the Sweptline
- New trans cooler lines for the truck
- All is calm on the old vehicle front
- Finally!
- Build Day 2
- Build Day 1
- Part I - Dissassembly
- Stop!
Archives
- January 2005
- March 2005
- May 2005
- December 2005
- January 2006
- May 2006
- February 2007
- March 2007
- April 2007
- May 2007
- October 2007
- December 2007
- June 2009
- Current Posts
